Kontron SYMKLOUD MS2900 Web - Manual (Page 13)

13 www.kontron.com
Quick Start Guide
For information about port mapping for the 10GbE and 1GbE connections, see Figure 11 in the ‚Configuring
Switches subsection under Section 4.1.1.
The MS2900 platform ships with an RJ-45 to DB-9 adapter included in the box. Connect this adapter to the
console end of your RJ-45 cable when you connect to the console port on the front panel of either hub
faceplate (Figure 6, ‚2‛ or ‚7‛).
Figure 7: RJ-45 to DB-9 Console Adapter
Figure 8 shows the location of the two 10GbE uplink ports and two 10GbE stacking ports (one of each for
each switch/ShMC hub).
Figure 8: MS2900 Rear I/O Connections