Technical data – Kontron KISS 2U KTQ87 User Manual
Page 44
12. Technical Data
KISS 2U V2_MB_SBC – User's Guide (Version 1.00)
12.
Technical Data
KISS 2U V2-xxxxxxxx-y
Installed CPU Card
* Refer to „KISS 2U V2 System - Configuration Guide“
Controls and Indicators
(at the front side)
Power button
Power LED (green)
HDD LED (orange)
Operating Elements
(at the rear side)
1x ON/OFF switch of the PSU: for system configuration with
AC wide range PSU (it doesn’t disconnect the unit from the mains)
Interfaces
(at the front side)
2x USB (2.0)
Interfaces
(at the rear side)
I/O of the installed CPU card (motherboard/SBC)
* refer to the manual of the installed CPU card (motherboard/SBC)
Drive Bays
Up to two drive bays
* optionally equipped (depending on the system configuration
ordered (refer to „KISS 2U V2 System - Configuration Guides“)
Free Expansion Slots
* optionally equipped (depending on the system configuration
ordered (refer to „KISS 2U V2 System - Configuration Guides“)
Lithium Batterie
* refer to the manual of the installed CPU card (motherboard/SBC)
Equipped Power Supply Unit
•AC Wide Range 100-240V
Rated Voltage Range
See type label
KISS 2U V2 = System type
The “
xxxxxxxxx” group is replaced by up to a max. 8-digit combination of numbers, letter or space, and
represents the installed CPU board
The “
y” is replaced by a single letter (A through Z) representing the power supply installed into the
system.
The corresponding “KISS 2U V2 System - Configuration Guides” and the manual of the installed CPU card
can be downloaded from
42
www.kontron.com