Product description, Fig. 2: rackmount version with closed access panel, Fig. 3: desktop version with closed access panel – Kontron KISS 2U KTQ87 User Manual
Page 15: Fig. 4: rackmount version with opened access panel, Fig. 5: desktop version with opened access panel
7. Product Description
KISS 2U V2 MB_SBC– User's Guide (Version 1.00)
7.
Product Description
The KISS 2U V2 platform expands the Kontron KISS computer line. KISS 2U V2 is a scalable 2U (19") platform, equipped
with a motherboard (KTQ 87/Flex) or a SBC (PCI-762) (
Single Board Computer) board, supporting various system
configurations
(refer to “KISS 2U V2 Systems - Configuration Guides” on our website). The flexible customer-specific hardware system
configuration and the robust construction with excellent mechanical stability of the KISS 2U V2 platform offer the
superior qualities of a computer designed for operation in harsh industrial environment.
The KISS 2U V2 platform is designed to be installed in 19" racks. It may be also installed as a desktop unit.
Versions of the KISS 2U V2 platform:
Fig. 2: Rackmount version with
closed access panel
Fig. 3: Desktop version with
closed access panel
Fig. 4: Rackmount version with
opened access panel
Fig. 5: Desktop version with
opened access panel
The system can be equipped with up to two drive bays (depending on the system configuration):
L1: one 5:25" front accessible drive bay
L2: one 3.5" internal drive bay or an front accessible slim drive
For customized versions and system configurations, please observe the corresponding “KISS 2U V2
System - Configuration Guides” for KISS 2U V2
.
The device is equipped with an AC wide rang.
The controls of the KISS 2U V2 platform are located behind the front access panel and consist, as standard, of a power
button, a power and HDD LED.
Two system fans are installed at the front side of the unit. These are attached to the system by a fan slide-in module. The
fan slide-in module simplifies the installation and removal of these components.
The washable filter mat, which protects your system against dust and dirt, is located on the front side of the system. This
filter mat can be replaced during operation.
Depending on the integrated CPU board [motherboard or SBC (Single Board Computer)] your system can be expanded
with different expansion cards.
The type label is located on the right hand side of the device.
www.kontron.com
13