Kontron SMARC Evaluation Carrier - Manual (Page 31)

User’s Guide
31 www.kontron.com
7.4 Jumper J36 – LVDS Panel Color Depth – Module LVDS
Jumpers J36 is used for selecting the color depth of the Module LVDS display. Most Modules will use 6 bit color packing
on the Module LVDS, and J36 should be inserted. This jumper has an effect only when the LVDS display in use has the
corresponding 6 bit / 8 bit color pack selection capability.
Jumper Position Function
J36
Inserted
Sets 6 bit per color packing on the display (if the display supports
this feature)
Not inserted
Sets 8 bit per color packing on the display (if the display supports
this feature)
7.5 Jumper J49 – SD Card WP
J49 is used to enable or disable the SDIO Write Protect.
Jumper Position Function
J49
Inserted Write access enabled for the SD card
Not inserted SD card is write protected
7.6 Jumper J58 – LVDS Panel Color Depth – Carrier LVDS
Jumper Position Function
J58
Inserted
Sets 6 bit per color packing on the display (if the display supports
this feature)
Not inserted
Sets 8 bit per color packing on the display (if the display supports
this feature)