Kontron SMARC Evaluation Carrier User Manual
User guide, Smarc evaluation carrier user guide
Table of contents
Document Outline
- 1 User Information
- 2 Introduction
- 3 Block Diagrams
- 4 Layout Diagrams
- 5 Connectors – Cabled Interfaces
- 6 Connectors – Standard Mezzanines, Slots and Sockets
- 7 Jumpers
- 7.1 Jumper J34 - LID#
- 7.2 Jumper J35 – TEST#
- 7.3 Jumpers J37, J38 and J39 – Boot Select
- 7.4 Jumper J36 – LVDS Panel Color Depth – Module LVDS
- 7.5 Jumper J49 – SD Card WP
- 7.6 Jumper J58 – LVDS Panel Color Depth – Carrier LVDS
- 7.7 Jumper J59 – Carrier Dual Channel LVDS Clock Edge
- 7.8 Jumper J60 – Carrier LVDS Pixel Clock Rate
- 7.9 Jumper J51 and J53 – Battery Select – Power Paths
- 7.10 Jumpers J50 and J52 – Battery Select – Thermistor Paths
- 7.11 Jumpers J55 and J56 – Input Power Path
- 7.12 Jumper J27 – Step-Down Switcher Disable
- 7.13 Jumper J26 LED Power Source
- 8 Push Button Switches
- 9 LEDs
- 10 KLAS (Kontron LVDS Adapter System) Connections
- 11 I/O Mezzanine
- 12 MMC Mezzanine
- 13 Camera Mezzanine
- 14 AFB Mezzanine
- 15 I2C Buses and Devices
- 16 I2S Buses and Devices
- 17 Power Architecture
- 18 Mechanical and Environmental Parameters
- 19 Appendix A: Connector Mating Part Number Information
- 20 Appendix B: Assembly Part Numbers
- 21 Appendix C: Document Revision History