Kontron COMe-cSP2 - Manual (Page 66)

COMe-cSP2 / System Ressources
61
7.4 Peripheral Component Interconnect (PCI) Devices
All devices follow the Peripheral Component Interconnect 2.3 (PCI 2.3) respectivily the PCI Express Base 1.0a
specification. The BIOS and OS control memory and I/O resources. Please see the PCI 2.3 specification for details.
PCI Device PCI IRQ Interface Comment
Host Bridge / Memory Controller None Integrated in chipset
Graphics / Video Controller INTA Integrated in chipset
USB Client Controller INTA Integrated in chipset
HD Audio Controller INTA Integrated in chipset
PCIexpress Port (Bridge) INTA Integrated in chipset
PCIexpress Port (Bridge) INTB Integrated in chipset
UHCI USB Controller 1 INTE Integrated in chipset
UHCI USB Controller 2 INTF Integrated in chipset
UHCI USB Controller 3 INTG Integrated in chipset
EHCI USB Controller INTH Integrated in chipset
SDIO/MMC Controller 1 INTA Integrated in chipset
SDIO/MMC Controller 2 INTB Integrated in chipset
ISA Bridge / LPC Controller None Integrated in chipset
IDE Controller None Integrated in chipset
Network Controller INTC PCI Express External i82574
SATA INTA PCI Express External SIL3132
Note: POST Codes (Power On Self Test) are not routed via PCI interface and are only available via LPC.
7.5 External I2C Bus #1
I2C Address Used For Available Comment JIDA Bus Nr.
A0h JIDA-EEPROM No EEPROM for CMOS Data 0
A2h JIDA-EEPROM No EEPROM for CMOS Data 0
7.6 External I2C Bus #2
I2C Address Used For Available Comment JIDA Bus Nr.
B0h Watchdog NO external WD PIC 2
7.7 JILI I2C Bus
I2C Address Used For Available Comment JIDA Bus Nr.
A0h JILI-EEPROM No EEPROM for JILI Data 4
7.8 SDVO I2C Bus
I2C Address Used For Available Comment JIDA Bus Nr.
3