Kontron COMe-cSP2 - Manual (Page 65)

COMe-cSP2 / System Ressources
60
7.3 I/O Address Map
The I/O-port addresses of the COMe-cSP2 are functionally identical to a standard PC/AT. All addresses not mentioned
in this table should be available. We recommend that you do not use I/O addresses below 0100h with additional
hardware for compatibility reasons, even if available.
I/O Address Used for Available Comment
0000 - 001F System
Ressources No Fixed
0020 - 003F Interrupt
Controller 1 No Fixed
002E - 002F WB 83627 No Fixed if WB83627HG is in system
0040 - 005F Timer, Counter No Fixed
004E - 004F TPM No Fixed if TPM is in system
0060 - 006F Keyboard
controller No Fixed
0070 - 007F RTC and CMOS
Registers No Fixed
0080 BIOS Postcode No Fixed
0081 - 008F DMA Page Register No Fixed
00A0 - 00BF Interrupt
Controller 2 No Fixed
00C0 - 00DF DMA Controller 2 No Fixed
00E0 - 00EF System Control No Fixed
00F0 - 00FF Math Coprocessor No Fixed
0170 – 0177
0376 Fixed Disk No Available if IDE port 1 is disabled
01F0 - 01F7
03F6 Fixed Disk No Available if IDE port 1 is disabled
0290-0295 WB83627 HWM No Fixed if WB83627HG is in system
03B0 - 03DF VGA No Fixed
0400 - 043F SMBus No Fixed
0480 - 04BF GPIO No Fixed
04D0 - 04D1 PIC Extension No Fixed
0900 - 091F Power
Management No Fixed
09C0 - 09FF GPE No Fixed
0A05 – 0A06 WB83627HG
Hardware Monitor No Fixed if WB83627HG is in system
0A80 – 0A81 CPLD No in Future versions
C000 - CFFF PCIe-to-PCI bridge No Dynamic (BIOS default address)
0CF8 - 0CFF PCI Configuration No Fixed
D000 - DFFF PCIe-to-PCI bridge No Dynamic (BIOS default address)
D880 - D88F Sil SATA Controller No Dynamic (BIOS default address)
E080 - E09F PCI USB Controller No Dynamic (BIOS default address)
E480 - E49F PCI USB Controller No Dynamic (BIOS default address)
E880 - E887 VGA No Dynamic (BIOS default address)
EF00 - EF1F PCI USB Controller No Dynamic (BIOS default address)
FFA0 - FFAF PCI IDE Controller No Dynamic (BIOS default address)