Kontron COMe-cSP2 - Manual (Page 105)

COMe-cSP2 / BIOS Operation
100
Boot Settings Configuration
Feature Option Description
Quick Boot Disabled
Enabled Allows BIOS to skip certain tests while booting. This will
decrease the time needed to boot the system
Quiet Boot Disabled
Enabled If disabled the BIOS generates the normal messages,
otherwise an OEM logo can be displayed
AddOn ROM Display Mode Force BIOS
Keep Current Keep Current keeps the current display mode. Force BIOS
switches to BIOS mode before an AddOn ROM is called
Bootup Num-Lock Off
On Select power-on state for Numlock
PS/2 Mouse Support Disabled
Enabled
Auto If disabled or no PS/2 mouse is found (Auto) the BIOS frees
up IRQ12
Wait For F1 If Error Disabled
Enabled Enabled allows the BIOS to wait for any error. If an error is
detected, pressing will enter the setup and the BIOS
settings can be adjusting to fix the problem
Boot USB HDD First Disabled
Enabled If enabled, boots new attached USB HDD first. If disabled,
sets new attached USB HDD to last boot position.
'Press DEL' Message Display Disabled
Enabled Enabled allows the BIOS to display the message Press DEL to
run Setup after memory initialization. Disabled suppresses
this message
Interrupt 19h Capture Disabled
Enabled If enabled AddOn ROMs can be trapped interrupt 19h (Boot
IRQ). This option would make sense when using network
boot (PXE ROM)