Usb client port, Configuration – Kontron COMe-cSP2 User Manual
Page 36
COMe-cSP2
/ COMe-cSP2 Connector
31
USB Client Port
The USB interface also supports one USB client port (USB port 7) that can be activated in setup. If the client function
is disabled in the BIOS this port acts as a standard USB port. Please be aware that USB power lines may not be
connected on the USB client port.
Note:
A Special USB client and host driver software is needed for USB client function. When this driver and
software is installed the client port appears as a mass storage device and NDIS Network device or as NDIS
Network device only in the device manager of the operating system. Please refer to the Kontron download
page for COMe-cSP2 for the driver
Configuration
The USB controllers are PCI bus devices. The BIOS allocates required system resources during configuration of the PCI
bus.
- CP3003-SA uEFI BIOS (72 pages)
- CP3003-SA (36 pages)
- CP3002 (38 pages)
- CP3002-RC uEFI (64 pages)
- CP-RIO3-05 (42 pages)
- CP3002-RC (30 pages)
- CP342 (52 pages)
- CP930 (46 pages)
- CP932 (52 pages)
- CP346 (72 pages)
- CP384 (66 pages)
- CP383 (74 pages)
- CP382 (58 pages)
- CP381 (60 pages)
- CP372 (64 pages)
- CP371 (60 pages)
- CP-RIO3-04S (38 pages)
- CP390 (36 pages)
- CPS3410 (9 pages)
- CPS3402 (9 pages)
- CPS3105 (9 pages)
- CPS3101 (9 pages)
- CPS3003-SA (19 pages)
- PB-SIO4 (34 pages)
- PB-SIO4A (34 pages)
- PB-DOUT8 (34 pages)
- VMOD-2 (82 pages)
- VSBC-32 (110 pages)
- VM42 (62 pages)
- Bootstrap Loader (24 pages)
- VMP1 with Netbootloader (120 pages)
- VMP1 (106 pages)
- NetBootLoader (86 pages)
- VMP2 (142 pages)
- VMP3 (154 pages)
- CP-RIO6-923 (32 pages)
- CP-RIO6-923-F (32 pages)
- CP-RIO6-001 (28 pages)
- CP-RIO6-001-HD-VGA (46 pages)
- CP-RIO6-M (20 pages)
- CP-RIO6-B (28 pages)
- CP6925 (42 pages)
- CP6002 uEFI BIOS (76 pages)
- CP6002 IPMI (40 pages)
- CP6002 (42 pages)