Kontron KTHM65-mITX - Manual (Page 103)

KTHM65 Users Guide
KTD-N0838-A Page 103
9.3.1.2 USB Configuration
Note1: Only visible if “USB Ports Per-Port Disable Control” is Enabled. USB6 and USB7 not supported
by KTHM65/mITX.
Aptio Setup Utility – Copyright © 2012 American Megatrends, Inc.
Chipset
USB Configuration
ECHI1
ECHI2
USB Ports Per-Port Disable Control
[Enabled]
[Enabled]
[Disabled]
Enable or disable XHCI Pre-
Boot Driver support.
→← : Select Screen
↑↓ : Select Item
Enter: Select
+/- : Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Version 2.15.1226. Copyright © 2012 American Megatrends, Inc
Function Selection Description
ECHI1
Disabled
Enabled
Control the USB EHCI (USB 2.0) functions.
One EHCI controller must always be enabled.
ECHI2
Disabled
Enabled
Control the USB EHCI (USB 2.0) functions.
One EHCI controller must always be enabled.
USB Ports Per-Port
Disable Control
Disabled
Enabled
Control each of the USB ports (0 – 13)
disabling.
USB Port #(0-13) Disabled
(Note1) Disabled
Enabled
Disabled USB port.
BIOS - Chipset