Kontron 986LCD-M-mITX (BGA) - Manual (Page 77)

986LCD-M Family
KTD-N0837-B Public User Manual Date: 2012-04-17 Page 77 of 91
8.3.11 Advanced settings – Remote Access Configuration
BIOS SETUP UTILITY
Advanced
Configure Remote Access type and parameters Select Remote Access
type.
<- Select Screen
|| Select Item
+- change option
F1 General Help
F10 Save and Exit
ESC Exit
Remote Access [Enabled]
Serial port number [COM1]
Base Address, IRQ [3F8h, 4]
Serial Port Mode [115200 8,n,1]
Flow Control [None]
Redirection After BIOS POST [Always]
Terminal Type [ANSI]
VT-UTF8 Combo Key Support [Enabled]
Sredir Memory Display Delay [No Delay]
V02.59+ (C)Copyright 1985-2005, American Megatrends, Inc.
Feature Options Description
Remote Access
(Settings below not displayed if
Remote Access is disabled) Disabled
Enabled Allows you to see the screen over the
comport interface, in a terminal window
Serial port number COM1
COM2 Setup which comport that should be used for
communication
Serial Port Mode 115200 8 n 1
57600 8 n 1
38400 8 n 1
19200 8 n 1
9600 8 n 1 Select the serial port speed
Flow Control None
Hardware
Software Select Flow Control for serial port
Redirection After BIOS POST Disabled
Boot Loader
Always How long shall the BIOS send the picture
over the serial port
Terminal Type ANSI
VT100
VT-UTF8 Select the target terminal type
VT-UTF8 Combo Key Support Disabled
Enabled Setup VT-UTF8 Combo Key
Sredir Memory Display Delay No Delay
Delay 1 sec
Delay 2 sec
Delay 4 sec Gives the delay in seconds to display memory
information.