Kontron 986LCD-M-mITX (BGA) - Manual (Page 69)

986LCD-M Family
KTD-N0837-B Public User Manual Date: 2012-04-17 Page 69 of 91
(continues)
BIOS SETUP UTILITY
Advanced
Primary IDE Master Select the type of
devices connected to
the system
<- Select Screen
|| Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
Device :Hard Disk
Vendor :ST340014A
Size :40.0GB
LBA Mode :Supported
Block Mode :16Sectors
PIO Mode :4
Async DMA :MultiWord DMA-2
Ultra DMA :Ultra DMA-5
S.M.A.R.T. :Supported
Type [Auto]
LBA/Large Mode [Auto]
Block (Multi-Sector Transfer) [Auto]
PIO Mode [Auto]
DMA Mode [Auto]
S.M.A.R.T. [Auto]
32Bit Data Transfer [Disabled]
V02.59+ (C)Copyright 1985-2005, American Megatrends, Inc.
Feature Options Description
Type Not Installed
Auto
CDROM
ARMD Select the type of device installed
LBA/Large Mode Disabled
Auto Enabling LBA causes Logical Block
Addressing to be used in place of Cylinders,
Heads, and Sectors.
Block (Multi-Sector Transfer) Disabled
Auto Select if the device should run in Block mode
PIO Mode Auto
0
1
2
3
4 Selects the method for transferring the data
between the hard disk and system memory. The
Setup menu only lists those options supported
by the drive and platform.
DMA Mode Auto, SWDMA0,
SWDMA1, SWDMA2,
MWDMA0, MWDMA1,
MWDMA2, UDMA0,
UDMA1, UDMA2,
UDMA3, UDMA4,
UDMA5 Selects the Ultra DMA mode used for
moving data to/from the drive. Autotype the
drive to select the optimum transfer mode.
Note: To use UDMA Mode 2, 3, 4 and 5 with a
device, the harddisk cable used MUST be
UDMA66/100 cable (80-conductor cable).
S.M.A.R.T. Auto
Disabled
Enabled Select if the Device should be monitoring itself
(Self-Monitoring, Analysis and Reporting
Technology System)
32Bit Data Transfer Disabled
Enabled Select if the Device should be using 32Bit data
Transfer