Kontron 986LCD-M-mITX (BGA) - Manual (Page 76)

986LCD-M Family
KTD-N0837-B Public User Manual Date: 2012-04-17 Page 76 of 91
Note on “Resume On PME#” (When using PCI LAN WOL function):
BIOS version must be 986LCD27 or higher. The LAN card must have a Standby Voltage input to make it
possible to implement WOL. Very often such cards have a 3 pin connector and one of the pins is the Standby
Voltage. This voltage can be taken directly from the ATX power supply or from the Front Panel connector pin
1 (or pin 2) or from the Feature connector pin 6.
8.3.10 PCI Express Configuration
BIOS SETUP UTILITY
Main Advanced PCIPnP Boot Security Chipset Exit
PCI Express Configuration
Active State Power-Management [Disabled]
Enable/Disable PCI
Express L0s and L1
link power states
<- Select Screen
|| Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
V02.59+ (C)Copyright 1985-2005, American Megatrends, Inc.
Feature Options Description
Active state Power-
Management Disabled
Enable Enable/Disable PCI Express L0s and L1 link
power states