Kontron 986LCD-M-mITX (BGA) - Manual (Page 43)

986LCD-M Family
KTD-N0837-B Public User Manual Date: 2012-04-17 Page 43 of 91
4.10.2 Ethernet connector 2/3 (ETHER2/3)
The two Ethernet channels in ETHER2/3 are supported by two discrete Ethernet controllers (RTL8111B)
connected to the onboard PCI bus.
The pinout of the RJ45’s connector are as follows:
Signal PIN Type Ioh/Iol Note
MDI0+
MDI0-
MDI1+
MDI2+
MDI2-
MDI1-
MDI3+
MDI3-
8 7 6 5 4 3 2 1
1 2 3 4 5 6 7 8
MDI0+
MDI0-
MDI1+
MDI2+
MDI2-
MDI1-
MDI3+
MDI3-
Note: The connector has two LEDs which indicates connection and traffic status. Green/Yellow means
100MHz/1GHz and flasing when traffic is ongoing. The left LED is status for the ETHER3 (buttom port) and
the right LED is for ETHER2. More than one type of connector is approved for this application. Please notice
that it is possible that the shape of the LED might vary depending on actual type of connector.