FBT DLM26 User Manual
Page 23
![background image](/manuals/636453/23/background.png)
−
Enable Password: from the “Enable Password” sub-menu:
Press “ENTER” to gain access to the “Enable Password” screen:
Once a Password has been entered into the DLM26 through the steps described in the previous
paragraph, it is possible to “Enable” or “Disable” the password function and therefore lock the
DLM26 restricting access to all functions.
When a password has been entered you will be able to select the “Enable” option from the
menu and the unit will not be accessible for editing. In “Locked by Password Status”, all
DLM26 functions are inhibited to the User, including the use of the Mute A/B and MUTE
1/2/3/4/5/6 buttons.
The only access available is to the parameters of the input/output channels (accessible by
pressing the edit button), ONLY to READ the values (no editing possible) if the “be shown” flag
in the “Show Parameter” Sub-Menu has been selected.
Once “Locked by Password” the “keylock” icon will appear on the default LCD screen and no
menu pages will be accessible, with the exception of the “User Password” option.
To regain access to the full operation of the DLM26 ENTER to the “User Password” screen and
press the UTILITY Button to access the following screen to enable the correct password to be
entered:
After the correct password has been entered, you will be able to access the full functionality of
the DLM26, the “lock Icon” will disappear from the “Default Screen” and automatically the
“Enable Password” page will be back to the “Disable” condition:
If no Password has been set within the DLM26, as described in the previous paragraphs, the
DLM26 will not allow you to enable any Password, and the choice in the “Enable Password” will
be limited to only the “Disable” option.
SECURITY UTILITY
-- User Password --
Enable Password
Password: Disable *
User Password
[ ]
Enable Password
Password: Disable *