Elecraft KX3-4M - Manual (Page 13)

13
Tools Required
1. ESD Protection (see Preventing Electrostatic Discharge Damage, page 12).
2. #1 size Phillips screwdrivers. To avoid damaging screws and nuts, a power screwdriver is not
recommended.
3. Long Nose Pliers.
4. Soft cloth or clean, soft static dissipating pad to avoid scratching the enclosure.
5. Optional: 5/16” wrench for tightening the antenna connector nut (see Figure 11 on page 19).
Parts Supplied
Be sure you have the following components in your kit. If anything is missing, contact Elecraft customer
support (page 18).
KX3-2M or 4M Transverter Assembly Bag (E850580)
ILLUSTRATION DESCRIPTION QTY.
ELECRAFT
PART NO.
Printed Circuit Board
ESD SENSITIVE! Leave it in its
anti-static envelope until it is
installed.
1
KX3-2M
E850580
KX3-4M
E850648
Shield
Label will be checked to indicate
whether the module is for 2M or 4M.
1 E850636
Adapter Board
The adapter board is required only if your KX3 is not with the KXAT3 Antenna Tuner option.
ILLUSTRATION DESCRIPTION QTY.
ELECRAFT
PART NO.
KX3-2M or 4M Adapter Board 1 E850633