Detex 14DN Trim User Manual
Page 3
DETEX INS-101296 Page 3
9. Drill holes "a" according to the chart (Fig. T9).
ASSEMBLING THE OUTSIDE TRIM AND BACK PLATE
10. Align the hex stand-offs and trim assembly through the drilled holes (Fig T10).
11. Align the tailpiece extension assembly into the backplate trim cam on the inside face of the door.
12. Fasten the backplate to the inside face of the door with lockwashers and 1/4-20 machine screws provided with
Exit Device Hardware Kit.
Caution: The lever should easily operate the inside trim cam.
13. Resume the panic hardware instruction.
Fig. T9
Fig. T10
Supplied with
panic device