AVer E5000 series - Manual (Page 98)

89
5. Preset Setting: use the control panel to adjust the position of the camera and select the
Preset Number to assign a number for the camera preset position. After is done, click
Save to keep the settings.
6. DwellTime: For how long the camera stays in that position before it moves to the next one
(the setup time period is 1~60 seconds). After is done, click Save to keep the settings.
7. Restore AutoPan Time: set a time period for restoring auto path function after the PTZ
camera has been moved. Mark the check box and set the time period in second.
8. Click Apply to save the settings.
9. After completing the PTZ setting, user can operate the PTZ function through PTZ control
panel in preview mode (see also Chapter 2.8.4 ).
Use the direction
buttons to adjust the
lens of camera to
desire position.
Use these 2 buttons
to Zoom in/Zoom out
the lens.
Use these 2 buttons
to Focus in/ Focus
out the lens.
Direction buttons’ moving speed