AVer E5000 series - Manual (Page 74)

65
6. After connection is successful, user should see the live video is displayed.
7. Also, user can enter the following data in Camera Information section and click Apply
button to make a connection of the IP camera.
 Name: Give a name for the IP camera.
 IP Address: Enter the IP camera
’s IP address.
 Port: Enter the port of connecting IP camera.
 Protocol: Enter the brand name of the IP camera. For example: AVer, AXIS...etc.
 Model: Enter the model type of the IP camera. For example: SF2012H-B
 User Name: The user name of IP camera for authentication when connect to the IP
camera.
 Password: The password of IP camera for authentication when connect to the IP
camera.
 Add to Camera: The channel that is going to connect the IP camera.
8. To configure the IP camera ’s detail setting, please refer to Chapter 2.8.3 .
9. To connect another IP camera, repeat the above steps.