AVer E5000 series - Manual (Page 110)

101
7. In Camera section, select and click on the camera number in Motion, Video Loss, IVA to
set the condition for the system to alarm.
If IVA alarm status is not enabled, the IVA functions that user has enabled will not
issue any alarm when IVA functions have triggered.
- Motion: select and click on the camera number (01 to 16) to set the condition for the
system to alarm. Click the Setting button to setup the system to send out the alarm
when motion is detected and last the time that user has entered in Continuous trigger
duration. The time range is 0~ 300 seconds.
- Video Loss: click the camera number (01 to 16) to set the alarm condition when video
is lost. Click the Setting button to setup the system to send out the alarm when video is
lost and status last the time that user has entered in Continuous trigger duration.
The time range is 0~ 300 seconds.