AVer E5000 series - Manual (Page 57)

48
2.6.2.1 Setup Transmitting Camera
Select and click on the camera number in the Transmitting Camera section you want to make it
accessible via internet using PCViewer, Remote site control, and iPhone/Andorid Viewer. To
select all the cameras, enable the ALL check box.
2.6.2.2 Setup UPnP
Assign a port number for UPnP service. Click OK to save the setting.
This function is working when the router had enabled the UPNP function and had opened the
port, which had assigned for UPNP setting, for the NVR/DVR system.
2.6.2.3 Setup Bandwidth Limit
Set the network bandwidth consumption limit for remote accessing. Click OK to save the
setting.