AVer E5000 series - Manual (Page 133)

124
4. In the POS Mapping dialog box, fill and select the following settings. Click OK to save the
settings and Cancel to exit without saving the new setting.
 Name: Enter a name to identify the POS.
 Protocol: Select the protocol.
 Skip first: Set the number of lines you want to be removed.
 Font Color: Select the text color of the POS data.
 Port Settings:
 Local: Select the COM port which is connected and Baud Rate.
 Remote: Use the TCP or UDP protocol for remote connection if POS system can
broadcast to Internet. Enter the IP address of the remote station.
 Map to Camera: Select to which camera number to display the transaction text.
 Text Filter: Enter the word you want to be removed.
5. To setup another iPOS setting, repeat the above steps.