AVer E5000 series - Manual (Page 64)

55
7. When the RAID is created, you should see the RAID drive in Detected HDD section.
8. Click Detail button of RAID drive, it displays the hard disks location of RAID on NVR/DVR
unit and related information.
9. The RAID drive needs to format before using it as a storage path. Select the RAID drive
and click Format button.
10. After formatting, the RAID drive can be set as a storage path.
When HDD status is shown as
“N/A”; it means HDD status is
normal and the word “SATA#”
is display in white text.
When the word “STAT#” is
display in red text, it
means HDD status is un-
normal.