AVer E5000 series - Manual (Page 96)

87
 PTZ Function
Setup IP PTZ
User can enable PTZ function if the IP camera has supported.
1. In Camera Management dialog box , click Setup tab
2. Then, select Camera # > PTZ tab.
3. In PTZ setup page, click Use PTZ to enable PTZ function.
4. Preset Setting: use the control panel to adjust the position of the camera and select the
Preset Number to assign a number for the camera current position. After is done, click
Save to keep the settings.
Use the direction
buttons to adjust the
lens of camera to
desire position.
Use these 2 buttons
to Zoom in/Zoom out
the lens.
Use these 2 buttons
to Focus in/ Focus
out the lens.
Direction buttons’ moving speed