Attwood Cowl Ventilator User Manual
Page 2
TOOLS AND MATERIALS REQUIRED FOR
INSTALLATION:
1. Drill and drill bits.
2. Three #8 stainless steel wood/sheet metal counter-sunk screws.
3. Hose clamp (15" nylon wire tie).
4. Screwdriver.
INSTALLATION INSTRUCTIONS:
1. Select a suitable location for cowl vent on deck. Using vent base
as template, mark and drill holes.
2. The installation hole diameter should be 3-1/2" when using a
nylon wire tie. Adjust the size of the hole diameter depending on
the size of the hose clamp.
3. Using a 3" ventilation hose, slide hose up through hole and attach
over vent flange.
4. Put hose clamp (15" nylon wire tie) around ventilation hose and
flange and tighten.
5. Mount base to deck and
attach vent head to base.
CAUTION: Do not
overtighten screws.
VENT BASE
VENT HEAD
VENT FLANGE
DECK
15" NYLON WIRE TIE
3" VENTILATION HOSE
- Integrated Fuel Demand Valve (1 page)
- Fill Limit Vent Valve (1 page)
- Grade Valve (1 page)
- Inlet Control Valve (1 page)
- Deck fills for Pressure Relief Systems (1 page)
- Deck fills for Carbon Canister Systems (1 page)
- EPA Certified Carbon Canisters (1 page)
- 1670 90° P-Trap Vents (1 page)
- Direct Fill Unit (2 pages)
- Turbo 3000 In-Line Blowers (2 pages)
- Battery Straps (1 page)
- Battery Tray with Strap (1 page)
- Battery Tray (2 pages)
- Toggle Switch (1 page)
- 7563 Two-Position Pull Switch (1 page)
- Push/Pull Switch Three-Position (1 page)
- 4-Way Battery Selector Switch (2 pages)
- S3 Series Automatic Bilge Switchs (2 pages)
- Fold Up Trailer Jacks (2 pages)
- Bilge Pump Installation Kit (2 pages)
- Bilge Pump Switches (1 page)
- Faucet Repair Kits (1 page)
- Stainless Steel Straight Thru-Hulls Threaded (1 page)
- Stainless Steel Scupper Valves (3 pages)
- Scupper Valve (1 page)
- 238 Series Seat Mounts (1 page)
- Anchor Rein II Anchor Lift (2 pages)
- Anchor Lift System (4 pages)
- Vinyl & Leather Repair Kit (2 pages)
- Soft Grip Steering Wheel (2 pages)
- Sportline Glove Boxes (1 page)
- Low Profile Marine Horn (1 page)
- Formed Wire Gimbaled Drink Holders (1 page)
- Wide View Ski Mirror (1 page)
- Counter-Sunk Flush Cleats (1 page)
- Lift Ring (1 page)
- Flats Boat Pole Holder (1 page)
- Boat Cover Repair Kit (1 page)
- Rip Guard Boat Cover Protectors (1 page)