Astak R4020A - User Manual - Manual (Page 53)

52
DNS
There are two ways to set DNS: "Attain DNS Automatically" and
"Set DNS Manually".
You can select “Attain DNS automatically" if your DNS provided
by ISP is dynamic; Or select "Set DNS Manually" and input the
DNS addresses that provided by your ISP. You can set up to
three DNS addresses.
*The other parameters can be set as Static IP type.
C. PPPoE
Item Description
WAN Access Type Select PPPoE type to access the WAN.
User Name & Password Input the user name and password provided by your ISP.
Service Name Input the service name if provided by your ISP.
Connection Type
There are 3 connection types provided: "Continuous", "Connect
on Demand" and "Manual".
If you select "Manual" type, you can click the
button to start a connection, and click the button
to disconnect it.
The default is "Continuous" type.