Setup wizard for gateway mode (router mode) – Astak R4020A - User Manual User Manual

Page 11

Text mode
Original mode

Setup Wizard for Gateway Mode (Router Mode)

Step 1:
The default operation mode is Router mode.
If this is the first time you enter the Web interface, you can click the

button directly in the home page.
If you want to change AP mode to Router mode, please select "Gateway" and apply
the change first in the "Operation Mode" page.

Step 2:
You can check the "Enable NTP client update" box to synchronize the time with an
NTP server, and select your time zone. After the setting, click the

button.

Step 3:
In this step you can change the IP address (default 192.168.100.1) and subnet mask
(default 255.255.255.0) of the router. This IP is used for LAN connection to the router.