Site survey – Astak R4020A - User Manual User Manual

Page 40

Text mode
Original mode

Site Survey

The Site Survey function is used to scan the available wireless networks for the router
to connect.

Note: This function is not supported and hidden in Router Mode.

The Web interfaces will display differently in each working mode.

 AP Mode
In AP mode, this function is only used to see the wireless networks within the range.

 AP Client Mode
If you are setting the router as an AP client, confirm Network Type has changed to
“Client” in Wireless > Basic Settings.
If you are setting the router as a Repeater, confirm Enable Universal Repeater Mode
(Acting as AP and client simultaneously) is checked, and SSID of Extended Interface
is set in Wireless > Basic Settings.
Follow the steps to connect to the AP.
Step 1:
Click the

button, you will see the wireless networks within the range,

select the one you want to connect and click the

button.