Canon B550 - Manual (Page 101)

Settings
RX SETTINGS
Factory sellings are in bold. For instructions on how to change a setting, refer to Flow to ehange a setting.pgs.8.v86.
Name Description Settings
ECM RX Enable/disable error correction during reception. ON/OFF
FAX/TEL SWITCH Enable/disable FAX/TEL switchover. When ON, this feature
answers calls, and if no fax tone is detected, the FAXPHONE
rings to alert you of an incoming calf
ON/OFF
RING START TIME Set the duration that the FAXPHONE listens for a fax tone before
starting to ring. 8 seconds(0 to 30)
F/T RING TIME Set the length of time the FAXPHONE will ring to alert you of an
incoming call. 15seconds|10to 45)
F/T SW ACTION Select the action taken after the F/T RING TIME expires. DISCONNECT/RECEIVE
INCOMING RING When the FAXPHONE is set for automatic receiving, set the
FAXPHONE to ring when it receives a calf
ON/OFF
RING COUNT Set the number of incoming rings before the FAXPHONE
answers. 2 times) 1 to 99)
ANS/FAX SWITCH Enable/disable whether the EAXPHONE automatically switches
to receive mode If a period of silence is detected after
answering the call.
ON/OFF
ANS/FAX SW TIME Set the duration of silence the FAXPHONE listens for to
determine if a fax is coming in.
4 seconds! 1 to 60)
MAN/AUTO SWITCH Determine if the FAXPHONE switches to document receive
mode after the FAXPHONE rings for a specified time when the
FAXPHONE is in the manual receive mode.
ON/OFF
RING TIME Set the amount of time the FAXPHONE will ring before
switching to document receive mode. 10 secondsll to 99)
REMOTE RX Allow you to dial a number code on the remote extension to
start receiving a document. ON/OFF
REMOTE RX ID If you set REMOTE RX ON, you can change the remote receiving
ID, 25 (00 to 99, * and #
included)
MEMORY RX Turn on/oft memory receiving of a document. ON/OFF
RX PAGE FOOTER Set the F/AXPHONE to print the time a document is received, the
transaction number, page numbers, and other useful information.
If you set RX PAGE FOOTER ON, SELECT REDUCE % setting in
RX REDUCTION is set to 90% automatically.
ON/OFF
DRPD
NORMAL RING
DOUBLE RING
SHORT-SHORT-LONG
SHORT-LONG-SHORT
OTHER RING TYPE
Enable/disable the Dustinctive Ring Pattern Detection (DRPD)
feature and assign a setting mode to each ring pattern.
See pg.21.
ON/OFF
TEL-FAX-FAX/TEL SWITCH
TEL FAX FAX/TEL SWITCH
TEL-FAX-FAX/TEL SWITCH
TEL-FAX-FAX/TEL SWITCH
TEL-FAX-FAX/TEL SWITCH
|g
oo
3]
S
89