Canon IXUS Z65 - Manual (Page 46)

Realtime Release Photography
• To use this mode, set the custom function CF1 to 1. (-> 44)
1 Set the focus.
• Position the AF frame over
the subject and press the
shutter button down
halfway.
^ The camera makes a brief
whirring sound
^The green indicator lights
when the subject is in
focus.
• Keep the shutter button
pressed down halfway
Take the picture.
• When the photo opportunity
arrives, press the shutter
button down fully.
^ The shutter is released
immediately. •
• If you press the shutter button all the way down in a
single movement, realtime release does not operate.
• Take care that the distance from the camera to the
subject does not change. If the distance does change,
start again from step 1.
• Take care not to touch the lens as this may result in
the picture being out of focus
•The <§>(V) 3nd modes use red-eye reduction
and should not be used, as the shutter cannot be
released immediately.
• The Focus Lock function can be used in the same
way as for normal photography.
0-46