B-45, Setting the custom functions – Canon IXUS Z65 User Manual

Page 45

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Setting the Custom Functions

Effects with the Function Set to t

Releases the shutter immediately when you press the shutter

button down halfway and then press it down fully. Useful for
situations where you need an instant camera response. (-> 4E)
Stores the flash mode in memory immediately before the

camera is switched off. Useful when you always want to set

the flash to a particular mode.___________________
Useful for situations where you do not want the sudden sound

of the film rewinding Press the button to start film

rewinding.

* •

Set the function.

• Press the

SET

button to

change the setting display
to 1 (function enabled)

Press the

SET

button again

to change the setting to 0

(function disabled)

• Pressing the

DATE

button or

setting the main switch to
ON completes the settings.

The custom function settings are retained even when

you switch the camera off and on, replace the film
cartridge, or replace the battery.

B-45