Nikon SPEEDLIGHT SB-16 User Manual
Page 92
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
> If your SB-16 has not been used for
a long time, its recyciing time may
be longer. To maintain the built-in
condenser in peak condition, there
by enabling you to use the SB-16 for
many years, fire the flash unit a few
times every month. After firing, wait
until the ready-light lights, then turn
off the power switch, remove the
batteries, and store the SB-16 in
a suitable location. This will pre
vent the condenser from deteri
orating.
»Keep the flash unit away from salt
water and out of the rain.
• Never attempt to disassemble or
repair the flash yourself. These deli
cate procedures should be left to
an authorized service facility.
67