Manual multiple flash photography, Ttl multiple flash photography ~61, Photographic techniques —continued – Nikon SPEEDLIGHT SB-16 User Manual
Page 84
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
-PHOTOGRAPHIC TECHNIQUES —continued
Manual multiple flash photography
If the secondary flash unit is either a Nikon Speedlight
SB-11, SB-12, SB-14, SB-15, SB-16 or SB-17, use either
the SC-11 (approx. 25cm) or SC-15 (approx. 1m) sync
cord to connect the fiash units together via sync/muitipie
fiash terminai. With the SB-7E or SB-10, use the SC-5
(approx. 15cm), SC-7 (approx. 25cm) or SC-6 (approx.
1m). Aii these sync cords are avaiiabie as optionai ac
cessories.
Note:
In manual multiple flash operation, rhake sure to use both flash
units
on
manual.
In
the
TTL
or
noh-TTL automatic
shooting mode, the
correct
exposure
cannot
be
obtained,
because
light
from
each
speedlight
affects the measurement.
Caution:
The SB-16 employs a special low-voltage triggering circuit to
prevent eiectrical shock and damage to the hot-shoe contact. W e do not
recommend mixing Nikon Speedlights with flash units of other makers for
multiple flash photography, unless you use slave units for remote trigger
ing. Otherwise, incorrect operation and/or damage to the unit may result.
62