Turn on the flash ' unit – Nikon SPEEDLIGHT SB-16 User Manual

Page 21

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

C-15.

Set lens to the

' minimum aperture

(largest f-number).

Q_'|0 Set the SB-16’s

' mode selector

to TTL.

For automatic

operation (A2)

17.

Turn on the flash

' unit.

Slide the SB-16’s ON/OFF switch to
the right. Immediately, an LED will light

up (green LED for TTL operation, or

red At or A2 LED for automatic

operation).

Note:

The LED may blink for a short while after

the flash unit is turned on. This does not indicate

a malfunction.

This manual is related to the following products: