Basic operation – Nikon SPEEDLIGHT SB-16 User Manual
Page 10
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
BASIC OPERATION
“I Set the open/closed knob
' ® on the flash unit coupler
to the OPEN position.
2 Attach the flash unit
' coupler to the flash unit.
Position the flash unit and flash unit
coupler, so that the secondary flash
head ® on the flash unit and the sen
sor ® on the flash unit coupler face
the same direction. Insert the posi
tioning claw @ into the slot (D on the
flash unit.
Then, while applying pressure to the
open/closed knob, push the flash
unit coupler into the flash unit until it
clicks into place.
Note:
It batteries have already been installed in
the
battery
chamber,
make
sure
the
ON/OFF
switch
®
is at the "otf" position to avoid acci
dental firing.