Accessories—continued, Ttl multi-flash sync cords sc-18 and sc-19, Ttl multi-flash adaptor as-10 – Nikon SPEEDLIGHT SB-16 User Manual
Page 87
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
ACCESSORIES—continued
TTL Multi-Flash Sync Cords SC-18 and SC-19
The SC-18 and/or SC-19 are used to connect the flash
units together for TTL multiple flash operation. The SC-
18 is 1.5m long, while the SC-19 is 3m.
TTL Multi-Flash Adaptor AS-10
When you plan to perform TTL multiple flash operation
with more than three flash units or to use the SB-15 or
SB-18 as a slave flash unit, the AS-10 is required. With
one AS-10 having three TTL multiple flash terminals, you
can use up to three slave flash units including one
mounted on it.
A tripod socket at the bottom enables the SB-16B
mounted on the AS-10 to be fixed to a tripod. To per
form TTL flash photography with two units using the SB-
16B as a slave flash unit or to perform TTL photography
with three units using the SB-16B as a master flash unit
mounted on the SC-17, use of the AS-10 is not always
needed. Without the AS-10, however, the electrical con
tacts on the flash unit are uncovered
and can be the cause of incorrect
output control.
64