Nikon SPEEDLIGHT SB-16 User Manual
Page 14
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
With the SB-16A,
turn the locking
ring @ around the mounting foot @
counterclockwise until the AS-8's
foot is uncovered (fig. 1). Then slide
the mounting foot onto the camera's
accessory shoe as far as it will go
(fig. 2). Finally, tighten the locking
ring to prevent the unit from acci
dentally slipping off (fig. 3).
With the SB-16B,
turn the locking
nut ® on the mounting foot (0 coun
terclockwise until it reaches its upper
limit (fig. 1). Then slide the mounting
foot forward into the shoe as far as it
will go (fig. 2). Finally, tighten the
locking nut to prevent the unit from
accidentally slipping off (fig. 3).