Nikon SB 11 User Manual
Nikon Flashlights
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Table of contents
Document Outline
- Nikon Speedlight
- NOMENCLATURE
- FOREWORD
- 2, Attach the bracket mounting adapter ® to the speedlight s handle
- 0^ Secure the bracket mounting adapter.
- Load the batteries.
- Install the battery clip.
- 0^ Close the battery chamber.
- Attach the bracket @ to the camera.
- 3^ Attach the bracket to the speedlight.
- 10. Attach the sync cord©.
- 11. Plug in the sensor ©.
- 1 9 Rotate the flash head ® * to the normal shooting position.
- 14. Set the exposure
- calculator dial (D.
- 15. Set the lens aperture ring to an appropriate f/number.
- 16. Set the shooting mode selector ©.
- 18. Watch the ready-light®.
- 19. Take the picture.
- 20. Turn off the speedlight.
- Bracket SK-4 @
- Bracket Mounting Adapter ®
- Tilting Flash Head @
- Wide-Flash Adapter SW-3 ©
- Exposure Calculator Dial (D
- Sensor Unit SU-2 ©
- Ready-Light (g)
- Open-Flash Button'
- Sync/Multiple Flash Sockets ©
- Sync Cord SC-11 ©
- Synchronization Chart
- — ACCESSORIES
- TIPS ON SPEEDLIGHT CARE
- OPTIMUM BATTERY PERFORMANCE
- SPECIFICATIONS