Nikon SPEEDLIGHT SB-16 - Manual (Page 17)

12. Set the zoom setting
®
'
knob on the exposure
calculator dial.
Turn the zoom setting knob at the
center on the dial until the zoom set­
ting index @) is opposite the same
letter as you selected in step 11.
Note:
The W i setting on the dial is used when
the wide-flash adapter is attached to the flash
unit with the zoom head set at Wi.
13. Set the shutter speed on
' the camera.
The proper shutter speed setting for
flash synchronization of each cam­
era is listed on page 21.
For example, set the shutter speed
dial of F3-series cameras or the FE2
to A or set the shutter speed/mode
selector of the FG to P or A.
Note:
For TTL operation with a Nikon F3-series
camera, the camera's backup mechanical
release lever cannot be used with the shutter
speed dial set at T (tim e). With the Nikon FA.
FE2. FG or Nikonos-V, a mechanical shutter
speed (i.e., M250. M90 or B) cannot be used for
TTL operation.
Steps 14 through 17 are divid-'
ed into three sections accor-'
ding to the shooting mode ’
seiected. Section A is for TTL\
automatic operation (with anf
F3-series, FA, FE2, F-501/N2020,
F-301/N2000, FG, or Nikonos-V)
camera), section B is for non-TTL
automatic operation, and section
C is for progammed TTL auto
operation (with the F-501/N2020
or F-301/N2000 camera set at a
programmed exposure mede).
For manuai operation and syn­
chronization with motor drive,
see pages 23 and 24.
13