Nikon 58-104 User Manual
Sb-104
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
This manual is related to the following products:
Table of contents
Document Outline
- Nikon
- Speedlight Parts
- Main Features
- About this Manual
- CONTENTS
- Tips on Speedlight Care
- Checking 0-rings
- Removing and Reseating 0-rings
- Installing the Battery
- Function Selector
- Flash Mode Selector
- Basic Flash Photography with the Nikonos RS
- > Set the camera’s sync mode to any . desired mode.
- I The Speedlight’s function seiector i is set to “Standard.”
- The Speediight's fiash mode ■ selector is set to TTL.
- Power switch is ON.
- Set the focus mode on the Nikonos RS to “S” or “C”.
- Set exposure mode to aperture- priority auto exposure (A).
- Check the flash shooting distance range and to be sure that the ready- light is lit up to shoot.
- • Caution
- Caring for the SB-104 After Use
- standby Switch
- Alert Signal Lamps
- Ready-light blinks.
- ♦Note
- Moisture alert light blinks.
- Heat alert light blinks.
- Electrical alert light blinks.
- ♦Note
- Reading the Exposure Calculation Chart
- Basic Tips on Underwater Flash Photography
- Camera Slave (Cordless Remote Photography)
- Flash Slave
- Rear-Curtain Sync Photography
- Using the Flash Signal Function
- Optional Accessories
- Details on NiCd Battery Unit SN-104
- Tips on SB-104 Care
- Notes of Caution
- Do not subject the Speedlight to vibrations or shock.
- Do not jump into the water while holding the Speedlight.
- Do not subject the Speedlight to excessive heat.
- Prevent dirt, mud, sand, dust, water, salt, or other foreign matter from entering the Speedlight.
- Take care not to splash water into the battery chamber or onto the NiCd batteries.
- If the Speediight gets soiled...
- Never disassemble the Speediight.
- Carrying the SB-104
- Safekeeping the SB-104
- Notes of Caution
- Specifications