For non-ttl automatic (a) operation, A (non-ttl automatic operation), Controls in detail —continued – Nikon SPEEDLIGHT SB-16 User Manual

Page 36

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

CONTROLS IN DETAIL —continued

For non-TTL automatic (A) operation

For non-TTL automatic operation, you can select one of
two f/stops, indicated by the blue and orange aperture
indicator lines at the bottom of fhe calculator dial. After

determining the aperture, set the shooting mode selector

corresponding to the aperture you selected.

Example 1

If you are using ASA/ISO 100 film (with the zoom head

set at N for a 35mm lens), fhe usable aperture is f/8 at

the blue At setting and f/4 at the orange A2 setting. The

automatic shooting range in this case is 0.6 to 4.0m

(2.0 to 13 ft.) at A1 and 0.6m to 8.0m (1.0 to 26 ft.) at A2.

For a subject more than 4m away, the only usable f/stop
is f/4. With a subject 3m away, you can select either f/8

or f/4. If a shorter recycling time is preferable, use f/4. If
greafer depfh of field is desired, use f/8.

This manual is related to the following products:

SB-16