Nikon SPEEDLIGHT SB-16 - Manual (Page 16)

BASIC OPERATION —continued
Q Tilt the flash head
®
to
' the normal shooting
position.
Tilt the flash head 90°, so that it
faces straight ahead.
'IQ Set ASA/ISO film speed.
' Turn the ASA/ISO film speed
setting ring ® around the exposure
calculator dial until the ASA/ISO
index ® is opposite the speed of the
film loaded in your camera. Also con­
firm that the film speed is properly
set on the camera.
Note:
For TTL operation with the F3-series, FA,
FE2, FG or Nikonos-V cameras, the usable film
speed range is from ASA/ISO 25 to 400 (with no
exposure compensation). W ith F-501/N2020 and
F-301/N2000, the usabte fiim speed range for
TTL operation is ASA/ISO 25 to 1000.
12
-|“( Set the zoom head d3).
' Pull out or push in the zoom
head until the number indicated with
an orange background matches the
focal length of the lens on your cam­
era. For lenses longer than 85mm,
use the 85mm setting. For a 24mm
lens, attach the Wide-Flash Adapter
® with the zoom head set at Wi. To
prevent light falloff at the edges of
the picture, do not use lenses wider
than 24mm. In the example, the
zoom head is set at 35 opposite the
letter N.
Note:
W hen the subject is closer than 1 meter,
it is recommended that you use a zoom, setting
which is one slep less than the lens local length
(e.g. use the 35mm setting with a 50mm lens).