Turn off the flash unit – Nikon SPEEDLIGHT SB-16 User Manual
Page 23
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
After you take the shot, watch the
ready-light inside the camera’s view
finder or the one on the SB-16. After
a short while, it will light up again to
tell you the flash unit is recycled and
ready to fire for the next shot.
Note;
If
the
flash
unit
fired
at
its
maximum
output, the ready-light blinks as a warning im
mediately
following
the
shot
to
indicate
there
still may be underexposure. In this case, check
the
combination
of
shooting
distance
and
aperture selected, and use a wider aperture or
move
closer
to
the
subject
if
necessary.
This
warning is also provided in the viewfinder of all
Nikon
cameras
having
a
built-in
ready-light
(except F2-series cameras).
20.
Turn off the flash unit.
' To conserve battery power
between shooting sessions, slide the
power switch to the left.
19