HP 49g Graphing Calculator - Manual (Page 54)

Time Management
By default, the HP 49G does not show the date and time. You can turn this
function on by selecting
CLOCK
on the Display Modes input form (as
explained on page 2-19). When the clock fimction is on, tire date and time
appear on the second line of the status area.
Even if you have chosen not to display the clock, you can use the
appointments feature of the HP 49G to set reminders or to set programs to
run at a specified time.
TiHi:
SET TIME ADD DftTE^^^
|B:42:28 AM
S 6 .-99 r-U-D.-'Y
Enter hfur
gHilMUTOM
Setting the date and time
To set the date or time:
1. Press ©
(MB.
2. Press ® ®
to highlight the
set time
,
DATE... function and then press OK.
The Set Time and Date input fomr is
displayed.
3. Press the appropriate arrow keys to high
light a value you want to set or change.
4. Change the value. (Each time and date field on this input form is both a
data field and a list field. See “Input form fields” on page 2-14 for infor­
mation on how to edit the fields on an input fomr.)
5. Repeat from step 3 if there are other values you want to change.
6.
When all the values are correct, press
OK.
The input form closes and the new date and time is displayed on the status
line (providing that you have chosen to display the clock and the status
area).
Page 2-26 Basic operation