HP 49g Graphing Calculator - Manual (Page 204)

Transferring data between two HP 49Gs
1. Ensure that the calculators are connected correctly.
2. On the sending calculator, navigate to tire directory that contains the
objects to send, and on the receiving calculator, navigate to the
directory where you want to store the received objects.
3. On both calculators, press (APS), then 2 and (ENTER) to select l/o
FUNCTIONS.
4. On the receiving calculator, press 2, then (ENTER) to select
GET FROM
HP
49. The receiving calculator connects to the sending calculator.
5. On the sending calculator:
a. Press (ENTER) to select
SEND TO HP
49. The Send to HP 49 input fonn is
displayed.
b. Press
CHOOS
to display the objects in the current directory.
c. Use the arrow keys to highlight an object to send and press
CHECK
to select it. Repeat this step for other objects you want to send.
d. Press
OK
to return to the Send to HP 49 input form.
e. Press
SEND.
The objects that you selected are transmitted to the
receiving calculator.
Transferring objects to or from an HP 48
To transfer objects between an HP 49G and an HP 48 series calculator,
you need to use the comrection adaptor that is supplied with the HP 49G.
You can only transfer objects you have created between the
HP 49G and the HP 48 series. If you attempt to transfer other
objects, it may cause errors.
1. Fit the adaptor to an end of the comrection cable.
2. Attach the adaptor end of the cable to the HP 48’s serial port, and the
other end to the HP 49G’s serial port.
3. On both the HP 49G and the HP 48, navigate to the directory where you
want to send or receive objects.
Page A-2 Connecting to another calculator