Sony SPP-A5000 - Manual (Page 48)

Calling from a remote phone
You can call from a pushbutton (tone) phone and "pick up" new
messages recorded on the phone, using the control codes for remote
operations.
However, you must first set the security code (see page 22) and turn
on the answering function.
1
Call your phone number from a pushbutton
phone.
1
a
к you make a mistake, you can
try again, up to three times and
then you will be disconnected.
Also, if you do not enter the
security code within 20 seconds,
you wUl be disconnected.
I■
If 20 seconds elapse without
pressing a control code, the call
will be disconnected.
2
When you hear the greeting, press (D and your
security code.
The two-digit security code must be entered within two
seconds.
Example : If your security code is 48, press .
You hear a long confirmation beep, emd the greeting
stops. The number of messages recorded on the
answering machine will be announced, (depending on the
recorded messages, the answering machine operates as
follows:
If there are: then the answering machine:
new messages (messages
that have not been played
back)
plays back the messages
automatically.
only old messages (messages
that already have been
played back) stands by for you to enter a
control code.
no new or old messages stands by for you to enter a
control <^e.
3 If you want to continue with another operation,
enter the control code within 20 seconds (see
page 49).
4 Hang up when you finish.
3 I Remote control functions