Hanging the base unit on a wall, I is – Sony SPP-A5000 User Manual

Page 15

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Hanging the base unit on a wall

■

To mount the wall bracket
directly on the wall, use the
supplied screws.

If your telephone outlet is not
modular, contact your telephone ^
service compily for assistance.

Attach the AC power adaptor cord and the short
telephone line cord to the wall bracket.

Hook the wall bracket to the wall plate and plug

the telephone line cord into the telephone
outlet.

Insert the tabs on the top of the wall bracket
into the base unit and press it so that the lower

tabs on the wall bracket go into the base unit.
Then extend the antenna fully.

Connect the AC power adaptor and the
telephone line cord.

For detaUs, see the "Connecting the base unit" section
(page 14).

Modular

Settingup

I IS