Storing memory dialing numbers, 1 press pgm, 2 press speed dial – Sony SPP-A5000 User Manual
Page 28: 3 press a dialing key between 0 and 9, 4 enter the phone number you wish to store, 5 press pgm
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Memory dialing
You can store the numbers you
frequently call into the memory
so that you can dial a number
with the touch of two buttons;
the SPEED DIAL button and a
key between 0 and 9.
PGM button
-SPEED DIAL
button
Storing memory dialing numbers
While storing a number, you
cannot receive calls.
1
Press PGM.
The TALK lamp flashes.
2
Press SPEED DIAL.
3
Press a dialing key between 0 and 9.
You hear a coitfirmation beep.
I
•
Do not enter a memory dialing
number that exceeds 16 digits
(the tone and pause digits are
each counted as one digit);
otherwise, you will hear five
short error beeps and you must
start over again.
4
Enter the phone number you wish to store.
If you enter a wrong number, press PGM and start again
ftximstepl.
5
Press PGM.
You hear a confirmation beep, and the TALK lamp goes
off.
Note on storing numbers----------------------------------
Do not let more than 20 seconds elapse between any two steps of
the storing procedure.
To change a stored number-------------------------------
Program a new number using the procedure above. The old
number will be erased automatically.
B I
Using as a telephone