Sony KV-32TS35 User Manual
Trinitron® color tv, Operating instruction, Owner’s record
Table of contents
Document Outline
- Contents
- Precautions
- Table of Contents
- Introducing the Sony TS/TW Series
- Locating the Controls
- T\WI0E0 button* ® ®
- Locating the Controls
- Locating the Controls
- Presetting TV Channels
- Use this feature to erase non-receiving channeis from the channei scan memory.
- Press MENU to display the following screen.
- Press the +1- button to select SET UP.
- Press the button to select CHANNEL ERASE.
- Press ENTER.
- Press the CH h-/- button to select the channel you want to erase.
- Press ENTER.
- Repeat step 4 to erase other channels.
- To return to TV mode
- Press EXIT.
- Presetting TV Channels
- 1-2
- (FOLLOW STEPS 1 & 2 ON P. 16)
- Press the +/- button to select CHANNEL ADD.
- Press ENTER.
- Press the 0 — 9 buttons to select the channel you want to add. For example, to add channel 25, press 2, 5 and ENTER.
- Press ENTER again.
- Repeat step 4 to add other channels.
- To return to TV mode
- To scan the preset channels* in numerical sequence
- To select a channel directly
- To turn off the TV
- Adjusting Picture and Sound Quaiity
- 1-2
- (FOLLOW STEPS 1 AND 2 ON P. 22)
- Select the MAIN mode to listen to STEREO sound.
- Select the SAP mode to listen to Second Audio Programs. \(R)
- Select the MONO mode to eliminate excessive noise during stereo broadcasts, caused by a weak incoming signal.
- Press ENTER.
- Turning the SPEAKER ON or OFF
- Scanning channels In the window picture
- KV-27TW76, KV-32TW75 and KV-32TW76 only)
- Using Picture-in-Picture
- Setting the CURRENT TIME
- Set the current time before using the Timer-activated functions from the GUIDE menu (pp. 34 - 39).
- Press MENU to display the following screen.
- Press the +/- button to select SET UP.
- Press ENTER.
- Press ENTER.
- Press the 0 — 9 buttons and ENTER to enter the current time. For example, to set the time at 3:15, press 0, 3,1, 5. (You must press 4 digits.)
- Press ENTER.
- Press the *!- button, to select AM or PM alternately.
- Setting the ON/OFF TIMER
- Using the Timer-activated Functions — GUIDE
- Setting CHANNEL BLOCK
- Use this function to block a channel from appearing on the screen during the preset time, for instance, to prevent children from watching undesirable programs.
- EXAMPLE: Set CHANNEL BLOCK at 8:45 PM, for one hour, on channel 38.
- Press MENU to display the following screen.
- Press the +!- button to select GUIDE.
- ! ENTER.
- Press the +/- buttons to select CHANNEL BLOCK.
- Press ENTER.
- Set the time that you want CHANNEL BLOCK to start by pressing 0 — 9 (you must press 4 digit) and ENTER.
- Select AM or PM by pressing the +I- button, and press ENTER.
- Set the duration of time that you want the TV to remain blocked (up to 9 hours), by pressing 1—9 and ENTER.
- Set the channel that you want to block, by pressing 0 — 9 and ENTER.
- Setting CHANNEL BLOCK
- Using the Timer-activated Functions ~ GUIDE
- Using CHANNEL CAPTION
- Captioning the channel display — CHANNEL CAPTION
- Use this feature to caption up to 12 channel number displays with the matching channel call letters. For example, caption channel 20 with ESPN.
- Press MENU to display the following screen.
- Press the +1- button to select SET UP.
- Press ENTER.
- Press the +/- button to select CHANNEL CAPTION.
- Press ENTER.
- Enter a directory (CHANNEL GUIDE — see p. 42) number for the caption by pressing one of the directory keys. For example, to set caption number 4, press 4.
- Select the channel you want to caption by pressing 0 — 9 and ENTER.
- Select the first letter by pressing the +1- button and ENTER. Press to advance alphabetically; press - to go back.
- Select each remaining letter by repeating step 6.
- (For a 3-letter caption, leave a space by pressing ENTER only.)
- To set the next caption, press ENTER again, and repeat the steps from step 4.
- Viewing the captioned channeis — CHANNEL GUiDE
- To cancel the CHANNEL GUIDE screen
- Connecting Vídeo Equipment
- Captioning the channel display — CHANNEL CAPTION
- Troubleshooting