Sony KV-32TS35 - Manual (Page 15)

I
Presetting TV Channels
Presetting TV Channels Automatically
TV/VIDEO POWER
1 Press POWER on the TV or the Remote Commander to turn the TV on.
POWER
O
b
POWER
a
2 Turn the cable connection on or off, depending on if you want to preset
cable or VHF/UHF channels.
(FOLLOW THE STEPS ON P. 14)
If "VIDEO ” or "S VIDEO ” Is displayed on the screen, press the TV/VIDEO button on
the TV or the Remote Commander so that a channel number appears.
Press AUTO PGM.
AUTO PGM 14 15
16 2
4^
if
"AUTO PROGRAM " is displayed on the screen and receivable channels (other than the
channe/s eiready preset) will be preset in numerical sequence. The chamois /xrevioualy
preset remain In the TV's memory.
When no more channels can be found, the programming stops and the lowest numbered
channel is dl^rlayed.
Press CH +1- to check or view preset channels.
P l ^
3 4
a
Channels that can be received on this TV:
VHF: 2 — 13
UHF: 14 — 69
Cable: 1 — 1 2 5
To erase unnecessary channels, or to add channels that could not be
preset automatically because their signal strength was too weak, follow the
steps in “Erasing Unnecessary Channels” (p. 16) and “Presetting Only
Desired Channels” (p. 18).
tiS3SsS£
jMSSfSS.
’S
9
Chapter 1: Set up
115